Nova Estimation

Carpentry Estimating Services

Carpentry estimating measures the rough and finish carpentry in a project: blocking, backing, rough openings, trim, door hanging and casework installation. Nova Estimation counts each item from the plans, elevations and schedules and prices material and labor separately, so carpentry scope is complete and easy to check.

  • CSI Division 06 Wood, Plastics and Composites
  • 24 to 48 hour delivery
  • Excel + marked-up PDFs
The problem

Why do carpentry bids go wrong?

  • Rough and finish carpentry are mixed together

    Backing, blocking, trim, casework and doors are priced by different crews, and a single lump sum hides where the money goes.

  • Trim takes longer than it looks

    Profiles, species and jobsite finishing change labor per linear foot, and bids often use one rate for every room.

  • Allowances replace real scope

    Owner allowances for finish carpentry quietly become overruns when the selections come in higher.

Scope

What do we measure in a carpentry takeoff?

Every carpentry item is measured from your sheets and carried in the units your crews and suppliers price in.

  • Rough Carpentry
  • Finish Carpentry
  • Door & Window Trim
  • Blocking & Backing
  • Fasteners & Adhesive
LFtrim, base, casing, blocking
SFpanelling, sheathing
EAopenings, assemblies
LSrough carpentry allowances
How we price it

How is a carpentry estimate priced?

Carpentry scope is spread across many sheets, which is why it is so often missed. We collect blocking and backing from the interior elevations, door and hardware counts from the schedules, and trim lengths from the finish plans.

Rough and finish carpentry are priced as separate sections because they are often performed by different crews. Installation of owner-supplied items is listed as labor only, so it is clear what is and is not included.

Method

What do our estimators check on a carpentry set?

We split the work into rough and finish carpentry. Rough items such as blocking and backing come from the framing and equipment details, while trim, doors and casework come from the interior elevations and schedules.

Trim is measured by profile and run with corner and miter counts, doors are counted from the schedule with their frames and hardware sets, and casework is measured by unit and length. Where the drawings leave finishes open, we state the assumption and carry an allowance.

Risk

What do carpentry bids usually miss?

These are the items we check on every set, because they are where bids lose money.

  1. 01

    Backing for everything mounted later, grab bars, TVs, casework, handrails.

  2. 02

    Trim mitre and return waste, which runs high on short runs and detailed profiles.

  3. 03

    Punch-list carpentry after the finish trades, budgeted as its own crew day.

  4. 04

    Material grade and species changes between the specification and the millwork schedule.

Deliverable

What does a carpentry estimate look like?

Line items are organized by CSI code with quantities you can trace back to the marked-up sheets.

Carpentry estimate.xlsxIllustrative sample
Illustrative line items, not from a client project
CSIItemQuantity
06 10 00Rough carpentry1 LS
06 20 00Finish carpentry1,240 LF
06 22 00Door & window trim68 EA
06 16 00Blocking & backing640 LF
06 05 23Fasteners & adhesive1 LS

Illustrative structure only. Your estimate is measured from your own drawings.

Projects

What kinds of carpentry projects do we estimate?

We estimate rough and finish carpentry for homes, tenant improvements and renovations. Each estimate separates blocking and framing from trim, doors and casework so the right crew can price its part.

Why Nova

Why use Nova Estimation for carpentry estimating?

  • Rough and finish separated

    Blocking, backing and framing blend are kept apart from trim, doors and casework.

  • Linear feet by profile

    Trim is measured by profile and run, with corners and miters noted.

  • Selections shown as allowances

    Where the drawings leave finishes open, we say so and carry a clear allowance.

Who orders it

Who orders a carpentry estimate?

  1. 01

    Carpentry subcontractors pricing rough and finish scopes

  2. 02

    Remodelers and builders ordering a trim and door package

  3. 03

    General contractors checking carpentry allowances

What to send

What should you send for a carpentry estimate?

These documents let us measure the trade completely. Missing items are flagged in the quote, not guessed.

  • Architectural floor plans
  • Interior elevations and casework details
  • Door, trim and finish schedules
  • Carpentry specification sections
  • Addenda and bid forms
  • Owner allowance sheets
How it works

How do you order a carpentry estimate?

You know the fee and the delivery date before we start. No retainers and no hourly billing.

  1. Upload

    Send architectural plans, interior elevations, the door and finish schedules and details.

    About 2 minutes
  2. Quote

    We confirm which carpentry scopes are included and the finish level, then send the fee.

    Within the hour
  3. Estimate

    Items are counted and measured by room and profile, then priced to your ZIP code.

    24 to 48 hours
  4. Deliver

    You receive the workbook, marked-up interior plans and an item summary by room.

    Bid day ready

Bidding carpentry this week?

Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.

Pricing

How much does a carpentry estimate cost?

A carpentry estimate is a fixed fee that depends on the number of interior sheets, the amount of finish detail and whether rough carpentry, trim, doors and casework are all included.

A plain interior is quicker to measure than a project full of custom millwork. Send the drawings and the fee arrives free, within the hour on working days.

FAQ

Carpentry estimating questions

Rough carpentry is structural and concealed work such as blocking, backing and nailers. Finish carpentry is visible work such as trim, doors, shelving and casework installation.

Yes. Blocking for grab bars, cabinets, TVs and equipment is counted from the interior elevations and accessories schedule.

Door hanging and hardware installation are counted from the door schedule and priced as finish carpentry labor.

Casework supply is usually under millwork. Installation can be estimated with carpentry if your crew installs it.

Yes. Base, casing and crown are measured by profile and length from the finish schedule.

The fee is fixed per project and quoted free within the hour on working days. There is no retainer and no minimum.

Most carpentry estimates arrive 24 to 48 hours after approval. The quote shows the delivery date before you start.

Casework can be included here or ordered as a separate millwork estimate if the scope is large.

Yes. Remodel work is measured from the plans and field notes you provide, with demolition and repair carried as separate lines.

Related trades

More structural trades we estimate

Get a fixed quote

Get a fixed quote for your carpentry takeoff

Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.

See sample estimates

What do you need?

Choose one service. You can add more later.

Which trades should we price?

Pick any trades, or choose all trades for a full GC estimate.

Structural and sitework

Architectural

MEP and specialty

About the project

Upload the plan set or paste a link. Add a note if anything needs explaining.