Nova Estimation

Access Control Estimating Services

Access control estimating counts the card readers, electrified locks, door contacts, request-to-exit devices and controllers in a building's security system. Nova Estimation takes off security drawings and the door hardware schedule together, measures cable runs to each panel, and delivers an access control estimate in 24 to 48 hours.

  • CSI Division 28 Electronic Safety and Security
  • 24 to 48 hour delivery
  • Excel + marked-up PDFs
The problem

Why do access control bids go wrong?

  • Doors drive the price

    Each controlled door needs a reader, lock, power and cable, and the door hardware schedule decides which.

  • Software and licenses are left out

    Head-end software, licenses and integration with other systems are required but often unpriced.

  • Cabling and power are shared scope

    Cable runs and power supplies may be assigned to the electrical trade, causing gaps.

Scope

What do we measure in an access control takeoff?

Every access control item is measured from your sheets and carried in the units your crews and suppliers price in.

  • Card Readers
  • Door Controllers
  • Electrified Hardware
  • Cable & Power
  • Programming & Commission
EAreaders, controllers, devices
SETelectrified hardware by opening
LFcable and conduit
LSprogramming and licensing
How we price it

How is an access control estimate priced?

Access control is coordinated with door hardware, so we read both. Each controlled door is listed with its reader, lock type, contacts and exit devices, using the security drawings and the hardware schedule.

Panels, power supplies and cable runs are measured to each controlled opening. Where cameras, intercoms or intrusion detection are part of the same scope, they are counted from the security plans.

Method

What do our estimators check on an access control set?

We use the door hardware schedule to identify every controlled door, then count readers, locks, request-to-exit devices and power supplies for each. Controllers, servers and software licenses are listed from the riser diagram.

Cable is measured by route and category, and conduit is added where the drawings require it. Integration with fire alarm, video or building systems is noted and priced separately.

Risk

What do access control bids usually miss?

These are the items we check on every set, because they are where bids lose money.

  1. 01

    Electrified door hardware, which is a hardware-schedule cost that lands in this budget.

  2. 02

    Power supplies, battery backup and the fire-alarm release interface at every controlled door.

  3. 03

    Head-end software, licensing and credential enrolment as distinct from the field devices.

  4. 04

    Coordination with the door, frame and hardware trade before the frames are ordered.

Deliverable

What does an access control estimate look like?

Line items are organized by CSI code with quantities you can trace back to the marked-up sheets.

Access Control estimate.xlsxIllustrative sample
Illustrative line items, not from a client project
CSIItemQuantity
28 13 00Card readers24 EA
28 13 00Door controllers8 EA
08 71 00Electrified hardware24 SET
28 05 13Cable & power2,600 LF
28 08 00Programming & commission1 LS

Illustrative structure only. Your estimate is measured from your own drawings.

Projects

What kinds of access control projects do we estimate?

We estimate access control for offices, schools, hospitals, apartments and industrial sites. Each estimate shows doors by type, equipment by model and cable by route, so you can adjust the door count without redoing the takeoff.

Why Nova

Why use Nova Estimation for access control estimating?

  • Door by door

    Each controlled door is counted from the hardware schedule with its reader, lock and power.

  • Head-end equipment listed

    Controllers, servers and software licenses are separate lines.

  • Cabling measured

    Cable and conduit are measured by route and category.

Who orders it

Who orders an access control estimate?

  1. 01

    Security contractors pricing access control systems

  2. 02

    Electrical contractors adding security scopes

  3. 03

    General contractors comparing security bids

What to send

What should you send for an access control estimate?

These documents let us measure the trade completely. Missing items are flagged in the quote, not guessed.

  • Security and floor plans
  • Door hardware schedules
  • Riser diagrams
  • Access control specification sections
  • Addenda and bid forms
  • Owner security standards
How it works

How do you order an access control estimate?

You know the fee and the delivery date before we start. No retainers and no hourly billing.

  1. Upload

    Send the security plans, door hardware schedules, riser diagrams, details and the specification.

    About 2 minutes
  2. Quote

    We confirm door counts, credential types and integration with other systems.

    Within the hour
  3. Estimate

    Doors, readers, controllers and cable are counted and measured by area.

    24 to 48 hours
  4. Deliver

    You receive the workbook, marked-up plans and a summary by door type.

    Bid day ready

Bidding access control this week?

Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.

Pricing

How much does an access control estimate cost?

An access control estimate is a fixed fee that depends on the number of security sheets, the number of controlled doors and whether video and intrusion systems are included.

A small office is faster than a campus with many buildings. The quote arrives free, usually within the hour on working days.

FAQ

Access Control estimating questions

Yes. Lock types and electrified hardware are taken from the hardware schedule so the access control scope matches.

Cameras are included when they are part of the security scope, or estimated under low voltage.

Programming and commissioning are listed as separate lines or allowances.

Yes, where it is shown on the security drawings.

Yes. Cable runs are measured from each controlled door to its panel.

The fee is fixed per project and quoted free within the hour on working days, with no retainer and no minimum.

Typically 24 to 48 hours from approval.

Yes. Video and intrusion systems can be added as separate lines or separate estimates.

Yes. Card, keypad and biometric readers are counted by type as specified.

Related trades

More specialty trades trades we estimate

Get a fixed quote

Get a fixed quote for your access control takeoff

Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.

See sample estimates

What do you need?

Choose one service. You can add more later.

Which trades should we price?

Pick any trades, or choose all trades for a full GC estimate.

Structural and sitework

Architectural

MEP and specialty

About the project

Upload the plan set or paste a link. Add a note if anything needs explaining.