Nova Estimation

Millwork Estimating Services

Millwork estimating counts and measures the cabinets, countertops, casework, paneling and architectural woodwork in a project. Nova Estimation takes off millwork from the interior elevations and details by item and size, separates shop-built and installed scope, and delivers a millwork estimate in 24 to 48 hours.

  • CSI Division 06 Wood, Plastics and Composites
  • 24 to 48 hour delivery
  • Excel + marked-up PDFs
The problem

Why do millwork bids go wrong?

  • Custom work hides in allowances

    Casework, counters and paneling are often covered by allowances, then overrun when shop drawings arrive.

  • Elevations are measured badly

    Linear feet of casework and countertop vary by design, and rough rules of thumb miss the difference.

  • Material choices change the price

    Species, veneer, laminate and solid surface vary widely, and the spec decides the cost.

Scope

What do we measure in a millwork takeoff?

Every millwork item is measured from your sheets and carried in the units your crews and suppliers price in.

  • Base Cabinets
  • Upper Cabinets
  • Solid Surface Tops
  • Paneling & Reveals
  • Hardware & Fittings
LFcabinet runs by height and depth
SFpanelling, tops, faces
EAunits, fittings, specialty items
LSshop drawings and hardware
How we price it

How is a millwork estimate priced?

Millwork is counted from the interior elevations, where each cabinet run, countertop and panel is drawn. Base and wall cabinets are measured by length and type, countertops by area and edge, and paneling by area with its trim.

Supply and installation are priced separately, because many projects buy millwork from a shop and install it with site crews. Hardware, solid surface and specialty finishes are listed as their own lines.

Method

What do our estimators check on a millwork set?

We work from the interior elevations and casework details, counting each unit and measuring lengths of base, wall and tall cabinets. Counters are measured by length and depth, with edges, splashes and cutouts listed.

Materials, finishes and hardware come from the specification and finish schedule. We note where shop drawings will control the final design and list assumptions for any detail the drawings leave open.

Risk

What do millwork bids usually miss?

These are the items we check on every set, because they are where bids lose money.

  1. 01

    Shop drawings, engineering and field measure, which precede fabrication and take real hours.

  2. 02

    Substrate, blocking and scribes required to install into an out-of-plumb building.

  3. 03

    Grade and finish from the specification, AWI grade changes the price more than the linear footage.

  4. 04

    Delivery, protection and site handling for finished casework on an active site.

Deliverable

What does a millwork estimate look like?

Line items are organized by CSI code with quantities you can trace back to the marked-up sheets.

Millwork estimate.xlsxIllustrative sample
Illustrative line items, not from a client project
CSIItemQuantity
06 41 00Base cabinets48 LF
06 41 00Upper cabinets36 LF
12 36 00Solid surface tops92 SF
06 42 00Panelling & reveals340 SF
06 41 00Hardware & fittings1 LS

Illustrative structure only. Your estimate is measured from your own drawings.

Projects

What kinds of millwork projects do we estimate?

We estimate casework, counters, paneling and custom woodwork for restaurants, offices, hotels and homes. Each elevation is measured by unit and length, with materials and hardware itemized.

Why Nova

Why use Nova Estimation for millwork estimating?

  • Elevation by elevation

    Casework is counted by unit and length from the interior elevations.

  • Materials as specified

    Laminate, veneer, stone and solid surface appear as their own lines.

  • Hardware and install separate

    Pulls, hinges, slides and installation are separate.

Who orders it

Who orders a millwork estimate?

  1. 01

    Millwork shops pricing casework packages

  2. 02

    General contractors comparing architectural woodwork bids

  3. 03

    Designers checking budgets during design development

What to send

What should you send for a millwork estimate?

These documents let us measure the trade completely. Missing items are flagged in the quote, not guessed.

  • Interior elevations
  • Casework and millwork details
  • Finish and hardware schedules
  • Architectural woodwork specifications
  • Addenda and bid forms
  • Shop drawing requirements
How it works

How do you order a millwork estimate?

You know the fee and the delivery date before we start. No retainers and no hourly billing.

  1. Upload

    Send the interior elevations, casework details, finish schedules and the millwork specification.

    About 2 minutes
  2. Quote

    We confirm quality grade, materials and whether hardware and installation are included.

    Within the hour
  3. Estimate

    Casework and counters are measured by elevation and type, then priced by material and unit.

    24 to 48 hours
  4. Deliver

    You receive the workbook, marked-up elevations and a casework summary.

    Bid day ready

Bidding millwork this week?

Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.

Pricing

How much does a millwork estimate cost?

A millwork estimate is a fixed fee that depends on the number of elevation sheets, the amount of custom detail and whether counters and installation are included.

A standard cabinet layout is faster than a lobby with feature paneling. The fee is quoted free within the hour on working days.

FAQ

Millwork estimating questions

Yes. Base, wall and tall cabinets are measured by length and type, with special units such as sink bases and corner units counted.

Yes. Countertops are measured by area, with edges, backsplash and cutouts counted separately.

Yes, so you can price a shop quote for supply and your own crew for installation.

Yes. Wall paneling, wood ceilings, reception desks and custom pieces are measured from the details.

Hinges, slides and pulls are included where they are specified, or carried as an allowance per cabinet.

The fee is fixed per project and quoted free within the hour on working days. No retainer and no minimum.

Most are delivered in 24 to 48 hours from approval.

Yes. Counters are measured by length and area with the specified material.

Yes. We list assumptions and allowances where details are not yet drawn.

Related trades

More architectural trades we estimate

Get a fixed quote

Get a fixed quote for your millwork takeoff

Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.

See sample estimates

What do you need?

Choose one service. You can add more later.

Which trades should we price?

Pick any trades, or choose all trades for a full GC estimate.

Structural and sitework

Architectural

MEP and specialty

About the project

Upload the plan set or paste a link. Add a note if anything needs explaining.