Nova Estimation

Waterproofing Estimating Services

Waterproofing estimating measures every waterproofed surface and joint in a building and prices the membrane systems, sealants and protection specified. Nova Estimation takes off below-grade walls, plaza decks, shower pans and sealant joints from the details and specification sections, and delivers a waterproofing estimate in 24 to 48 hours.

  • CSI Division 07 Thermal and Moisture Protection
  • 24 to 48 hour delivery
  • Excel + marked-up PDFs
The problem

Why do waterproofing bids go wrong?

  • Below-grade and above-grade systems are mixed

    Foundation membranes, plaza decks and building envelopes use different products and are often priced as one line.

  • Termination details add linear feet

    Flashings, terminations and penetrations add length and labor that area-only bids miss.

  • Surface preparation is unpriced

    Cleaning, patching and primers are required by most manufacturers but rarely appear in bids.

Scope

What do we measure in a waterproofing takeoff?

Every waterproofing item is measured from your sheets and carried in the units your crews and suppliers price in.

  • Sheet Membrane · Below Grade
  • Fluid-applied · Deck
  • Flashing & Termination
  • Drainage Board
  • Joint Sealant
SFmembrane and protection area
LFterminations, joints, reglets
EApenetrations, drains, corners
How we price it

How is a waterproofing estimate priced?

Waterproofing scope is defined in the details more than on the plans. We read each detail, below-grade walls, under-slab membranes, plaza decks, planters and terminations, and measure the system it calls for, including protection board and drainage mat.

Sealants and joint fillers are measured by joint size and length, because a 1-inch expansion joint and a 1/4-inch control joint cost very differently per foot. Transitions to roofing and curtain wall are listed so it is clear which trade carries them.

Method

What do our estimators check on a waterproofing set?

We separate the systems by location: foundation walls, slabs, plaza decks and above-grade envelope. Each is measured by area from the plans and sections, with the specified membrane, primer and protection layers.

Terminations, drains, penetrations and expansion joints are measured in linear feet or counted from the details. Manufacturer requirements for substrate prep and warranty are listed so they are priced, not assumed.

Risk

What do waterproofing bids usually miss?

These are the items we check on every set, because they are where bids lose money.

  1. 01

    Terminations, transitions and tie-ins, which are where every failure and most of the labor occur.

  2. 02

    Substrate preparation and the moisture condition required before the material can be warranted.

  3. 03

    Protection course and drainage, without which the membrane does not survive backfill.

  4. 04

    Detailing at penetrations, corners and cold joints, counted per condition rather than per area.

Deliverable

What does a waterproofing estimate look like?

Line items are organized by CSI code with quantities you can trace back to the marked-up sheets.

Waterproofing estimate.xlsxIllustrative sample
Illustrative line items, not from a client project
CSIItemQuantity
07 13 00Sheet membrane, below grade2,180 SF
07 14 00Fluid-applied, deck860 SF
07 65 00Flashing & termination420 LF
07 10 00Drainage board2,180 SF
07 92 00Joint sealant380 LF

Illustrative structure only. Your estimate is measured from your own drawings.

Projects

What kinds of waterproofing projects do we estimate?

We estimate waterproofing for foundations, podium decks, plazas and building envelopes. Each system is measured separately, with terminations, drains and protection layers listed.

Why Nova

Why use Nova Estimation for waterproofing estimating?

  • Systems separated

    Below-grade, plaza and envelope systems are measured and priced apart.

  • Terminations in linear feet

    Edges, drains and penetrations are counted from the details.

  • Prep and protection included

    Primers, protection board and prep work are separate lines.

Who orders it

Who orders a waterproofing estimate?

  1. 01

    Waterproofing contractors pricing membrane and sealant scopes

  2. 02

    General contractors comparing envelope bids

  3. 03

    Owners budgeting repair and remediation

What to send

What should you send for a waterproofing estimate?

These documents let us measure the trade completely. Missing items are flagged in the quote, not guessed.

  • Foundation and structural plans
  • Wall sections and envelope details
  • Waterproofing details and terminations
  • Waterproofing specification sections
  • Addenda and bid forms
  • Warranty requirements
How it works

How do you order a waterproofing estimate?

You know the fee and the delivery date before we start. No retainers and no hourly billing.

  1. Upload

    Send the foundation plans, wall sections, waterproofing details and the specification.

    About 2 minutes
  2. Quote

    We confirm the system, warranty and whether insulation and protection are included.

    Within the hour
  3. Estimate

    Surfaces are measured by system, with terminations and penetrations counted along the details.

    24 to 48 hours
  4. Deliver

    You receive the workbook, marked-up sections and a quantity summary by system.

    Bid day ready

Bidding waterproofing this week?

Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.

Pricing

How much does a waterproofing estimate cost?

A waterproofing estimate is a fixed fee that depends on the number of sheets, the number of different systems and whether prep, protection and insulation are included.

A single foundation membrane is faster than a podium with many drains and terminations. The quote is free and arrives within the hour on working days.

FAQ

Waterproofing estimating questions

Yes. Foundation wall and under-slab membranes are measured by area, with protection, drainage mat and terminations.

Yes. Sealant joints are measured by length and size from the details and the joint sealant specification.

Air barriers can be priced here or with the envelope. We follow the scope split in your bid package.

Yes. Plaza and podium decks are measured with the membrane, protection, drainage and overburden layers.

Penetrations, drains and corners are counted from the details, because they take far more labor than flat field areas.

The fee is fixed per project and quoted free within the hour on working days. No retainer and no minimum.

Most are delivered in 24 to 48 hours from approval.

Yes. Protection and drainage layers are measured by area and shown separately.

Yes. Sealant joints are measured in linear feet from the details.

Related trades

More architectural trades we estimate

Get a fixed quote

Get a fixed quote for your waterproofing takeoff

Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.

See sample estimates

What do you need?

Choose one service. You can add more later.

Which trades should we price?

Pick any trades, or choose all trades for a full GC estimate.

Structural and sitework

Architectural

MEP and specialty

About the project

Upload the plan set or paste a link. Add a note if anything needs explaining.