Solar Estimating Services
Solar estimating counts the modules, racking, inverters and balance of system in a photovoltaic project and prices supply and installation. Nova Estimation takes off rooftop and ground-mount layouts and single-line diagrams, measures DC and AC wiring and conduit, and delivers a solar PV estimate in 24 to 48 hours.
- CSI Division 26 Electrical
- 24 to 48 hour delivery
- Excel + marked-up PDFs
Why do solar bids go wrong?
-
Module counts ignore the real layout
Roof obstructions, setbacks and string layouts decide how many panels fit, and a kilowatt rate misses the difference.
-
Electrical balance of system is underpriced
Inverters, combiners, disconnects, conduit and wire often cost as much as the panels but are left as an allowance.
-
Racking depends on the roof or ground
Roof type, tilt and soil conditions change attachment and foundation cost sharply.
What do we measure in a solar takeoff?
Every solar item is measured from your sheets and carried in the units your crews and suppliers price in.
- PV Modules · 450w
- Racking & Attachment
- Inverters / Optimizers
- DC/AC Conduit & Wire
- Grounding & Bonding
How is a solar estimate priced?
Solar estimates start with the array layout: module count, racking type and attachment spacing. We count each from the layout drawings and add the rails, clamps, ballast or piles the system requires.
Balance of system is where solar estimates lose money. Inverters, combiners, disconnects, DC and AC conductors, conduit and grounding are measured from the single-line diagram and electrical plans, with interconnection listed separately.
What do our estimators check on a solar set?
We count modules from the array layout and confirm them against the stated system size. Strings, combiners, inverters and disconnects are listed from the single-line diagram and equipment schedule.
Racking, attachments, ballast or piles are measured from the structural and site details. Conduit, trenching and wire are measured by route, and monitoring, storage and interconnection items are listed separately.
What do solar bids usually miss?
These are the items we check on every set, because they are where bids lose money.
- 01
Roof attachment and flashing method, which is a roofing warranty question before it is a solar one.
- 02
Structural review of the existing roof for the added dead and wind load.
- 03
Interconnection, utility application, metering and the point of common coupling.
- 04
Rapid shutdown, labelling and the inspection requirements of the local jurisdiction.
What does a solar estimate look like?
Line items are organized by CSI code with quantities you can trace back to the marked-up sheets.
| CSI | Item | Quantity |
|---|---|---|
| 26 31 00 | Pv modules, 450w | 248 EA |
| 26 31 00 | Racking & attachment | 111.6 KW |
| 26 31 00 | Inverters / optimisers | 6 EA |
| 26 05 33 | Dc/ac conduit & wire | 1,860 LF |
| 26 05 26 | Grounding & bonding | 1 LS |
Illustrative structure only. Your estimate is measured from your own drawings.
What kinds of solar projects do we estimate?
We estimate rooftop and ground-mount solar for commercial roofs, warehouses, schools, farms and utility-scale developments. Each estimate shows modules by array, balance of system by type and civil work by quantity.
Why use Nova Estimation for solar estimating?
-
Modules counted from the layout
Panels, strings and arrays are counted from the layout and checked against the stated system size.
-
Balance of system itemized
Inverters, wiring, conduit, disconnects and monitoring are listed individually.
-
Racking and foundations separate
Racking, attachments, ballast or piles are separate lines tied to the roof or ground detail.
Who orders a solar estimate?
- 01
Solar installers pricing rooftop and ground-mount systems
- 02
General contractors adding solar to a building project
- 03
Developers budgeting on-site generation
What should you send for a solar estimate?
These documents let us measure the trade completely. Missing items are flagged in the quote, not guessed.
- Solar layouts and site plans
- Single-line and three-line diagrams
- Equipment schedules and data sheets
- Structural and roof details
- Interconnection requirements
- Addenda and bid forms
How do you order a solar estimate?
You know the fee and the delivery date before we start. No retainers and no hourly billing.
Upload
Send the solar layouts, single-line diagrams, equipment schedules, structural details and the specification.
About 2 minutesQuote
We confirm roof or ground-mount type, interconnection scope and any storage equipment.
Within the hourEstimate
Modules, racking, electrical and civil work are counted and measured by system.
24 to 48 hoursDeliver
You receive the workbook, marked-up layouts and a summary by system.
Bid day ready
Bidding solar this week?
Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.
How much does a solar estimate cost?
A solar estimate is a fixed fee that depends on the number of sheets, the size and type of the array and whether storage, civil work and interconnection are in scope.
A rooftop system on one building is quicker than a ground-mount array across several acres. The quote arrives free, usually within the hour on working days.
Solar estimating questions
Yes. Rooftop systems are measured by attachment type, ground-mount systems by pile or ballast foundation.
Yes. Inverters, combiners, disconnects, wiring, conduit and grounding are measured from the single-line diagram.
Battery systems are counted where they are drawn and usually priced from vendor quotes.
Yes. Racking is measured by rail length, attachments and clamps, or by pile count for ground mounts.
Interconnection equipment on the customer side is included. Utility-side work is listed as excluded unless drawn.
The fee is fixed per project and quoted free within the hour on working days, with no retainer and no minimum.
Most solar estimates arrive in 24 to 48 hours from approval.
Conduit, wiring and interconnection items shown on the drawings are listed as separate lines.
The site plan, array layout, electrical drawings and equipment schedule.
More specialty trades trades we estimate
Get a fixed quote for your solar takeoff
Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.