Nova Estimation

HVAC Estimating Services

HVAC estimating measures the ductwork, equipment, air devices and piping in a heating, ventilation and air conditioning system and prices supply and installation. Nova Estimation takes off duct by gauge and weight, counts equipment and grilles from the schedules and delivers an HVAC estimate for commercial or residential projects in 24 to 48 hours.

  • CSI Division 23 HVAC
  • 24 to 48 hour delivery
  • Excel + marked-up PDFs
The problem

Why do HVAC bids go wrong?

  • Duct weight is not on the drawings

    Duct is drawn by size and run, but priced by weight, so the takeoff needs conversion from lengths to pounds.

  • Equipment dominates the budget

    Rooftop units, air handlers and VAV boxes carry large lead times and prices, and bids often blur them into one number.

  • Controls and balancing are missed

    Thermostats, sensors, controls wiring and testing and balancing show up late and break the budget.

Scope

What do we measure in an HVAC takeoff?

Every HVAC item is measured from your sheets and carried in the units your crews and suppliers price in.

  • Rooftop Units
  • Ductwork · Galvanized
  • Diffusers & Grilles
  • VAV Boxes
  • Duct Insulation
LBsheet metal by gauge
EAequipment, boxes, diffusers
LFround duct, piping, linesets
CFMair volume by zone
How we price it

How is an HVAC estimate priced?

Ductwork is priced by weight, so we measure every run by size and convert it to pounds by gauge, with fittings counted separately. Flexible duct, insulation and duct lining are measured as their own lines.

Equipment, air devices and dampers are counted from the mechanical schedules and checked against the plans. Refrigerant and hydronic piping, controls and testing and balancing are included where they are part of the HVAC scope.

Method

What do our estimators check on an HVAC set?

Ductwork is measured by size and run from the mechanical plans, then converted to weight by gauge. Diffusers, grilles, dampers and flexible duct are counted from the plans and schedules.

Equipment such as rooftop units, air handlers and VAV boxes is taken from the schedules, and insulation, hangers, controls and balancing are added from the specification. Each system is totaled separately.

Risk

What do HVAC bids usually miss?

These are the items we check on every set, because they are where bids lose money.

  1. 01

    Ductwork by weight and gauge, with fittings counted, fittings carry the fabrication hours.

  2. 02

    Curbs, hangers, vibration isolation and structural support for rooftop equipment.

  3. 03

    Controls, wiring and integration boundaries between the mechanical and electrical scopes.

  4. 04

    Test, adjust and balance, and the commissioning the specification requires before handover.

Deliverable

What does an HVAC estimate look like?

Line items are organized by CSI code with quantities you can trace back to the marked-up sheets.

HVAC estimate.xlsxIllustrative sample
Illustrative line items, not from a client project
CSIItemQuantity
23 74 00Rooftop units3 EA
23 31 13Ductwork, galv.4,860 LB
23 37 13Diffusers & grilles68 EA
23 36 00VAV boxes18 EA
23 07 13Duct insulation2,140 SF

Illustrative structure only. Your estimate is measured from your own drawings.

Projects

What kinds of HVAC projects do we estimate?

We estimate HVAC for office fit-outs, schools, clinics, warehouses and multifamily projects. Estimates show duct by size and weight, equipment by schedule and piping by system, so every system can be repriced separately.

Why Nova

Why use Nova Estimation for HVAC estimating?

  • Ductwork by size and weight

    Rectangular and round duct are measured by size and run, then converted to pounds.

  • Equipment itemized

    Units, boxes, diffusers and grilles are counted from the schedules and plans.

  • Insulation, controls and balancing listed

    Duct insulation, controls and testing are carried as their own lines.

Who orders it

Who orders an HVAC estimate?

  1. 01

    HVAC contractors pricing ductwork and equipment

  2. 02

    Mechanical subcontractors comparing sheet metal quotes

  3. 03

    General contractors checking mechanical bids

What to send

What should you send for an HVAC estimate?

These documents let us measure the trade completely. Missing items are flagged in the quote, not guessed.

  • Mechanical plans, all floors and roof
  • Equipment schedules and sequences of operation
  • Ductwork and piping details
  • Mechanical specification sections
  • Addenda and bid forms
  • Supplier quotes for major equipment
How it works

How do you order an HVAC estimate?

You know the fee and the delivery date before we start. No retainers and no hourly billing.

  1. Upload

    Send the mechanical plans, equipment schedules, details, controls diagrams and the specification.

    About 2 minutes
  2. Quote

    We confirm equipment supply, controls scope and balancing, then send the fee.

    Within the hour
  3. Estimate

    Duct, pipe and equipment are taken off by system, with accessories and insulation added.

    24 to 48 hours
  4. Deliver

    You receive the workbook, marked-up plans and a summary by system and material.

    Bid day ready

Bidding HVAC this week?

Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.

Pricing

How much does an HVAC estimate cost?

An HVAC estimate is a fixed fee that depends on the number of mechanical sheets, the number of systems and the amount of equipment and controls in scope.

A packaged rooftop system is quicker than a chilled water plant with many air handlers. Send the plans and you receive the fee free, usually within the hour on working days.

FAQ

HVAC estimating questions

By size and length from the mechanical plans, converted to weight by gauge, with fittings, hangers and sealing included.

Yes. Units, fans, VAV boxes and other equipment are counted from the schedules. Equipment pricing can come from your vendor quotes or current data.

Yes. Residential systems are measured by equipment, duct runs and registers for each home or unit type.

Controls are included as a separate line or allowance, depending on how they are specified.

Where the specification includes it in the HVAC scope, testing and balancing is carried as its own line.

The fee is fixed per project and quoted free within the hour on working days, with no retainer and no minimum.

Typically 24 to 48 hours from approval, shown in the quote.

Yes. Duct is measured by size and run and converted to pounds by gauge so it can be priced against sheet metal quotes.

Yes. Controls, commissioning support and balancing are listed separately so you can include or exclude them.

Related trades

More MEP trades we estimate

Get a fixed quote

Get a fixed quote for your HVAC takeoff

Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.

See sample estimates

What do you need?

Choose one service. You can add more later.

Which trades should we price?

Pick any trades, or choose all trades for a full GC estimate.

Structural and sitework

Architectural

MEP and specialty

About the project

Upload the plan set or paste a link. Add a note if anything needs explaining.