Nova Estimation

Electrical Estimating Services

Electrical estimating counts the devices, fixtures, panels and gear in a project and measures the conduit and wire that connect them. Nova Estimation takes off power, lighting and one-line drawings, measures feeders along their actual routing and applies labor units by system and height, delivering an electrical estimate in 24 to 48 hours.

  • CSI Division 26 Electrical
  • 24 to 48 hour delivery
  • Excel + marked-up PDFs
The problem

Why do electrical bids go wrong?

  • Device counts do not match the panel schedules

    Lighting, power and low-voltage devices live on different sheets, and a count from one plan misses what the riser and panel schedules require.

  • Wire and conduit are priced by the lump

    Home runs, feeders and branch circuits are long runs that depend on routing, so a per-device rate hides the real length.

  • Fixtures and gear carry long lead times

    Switchgear, panels and specialty fixtures drive the schedule and the budget, yet often appear as a single allowance.

Scope

What do we measure in an electrical takeoff?

Every electrical item is measured from your sheets and carried in the units your crews and suppliers price in.

  • Devices & Boxes
  • Lighting Fixtures
  • Panelboards & Gear
  • Conduit & Fittings
  • Conductor · Feeder/branch
EAdevices, fixtures, panels, gear
LFconduit and conductor by size
CKTbranch circuits by panel
LSgear, testing, commissioning
How we price it

How is an electrical estimate priced?

Electrical cost is mostly labor, so the takeoff has to support labor units. We count devices, fixtures and equipment by type from the plans and schedules, and measure conduit and conductor by size along the routing shown, not as straight lines between panels.

Feeders are taken from the one-line diagram and panel schedules. Equipment connections are collected from the mechanical, plumbing and kitchen schedules, because they rarely appear on the power plan in full.

Method

What do our estimators check on an electrical set?

We begin with the panel schedules and one-line diagram to understand the distribution, then count fixtures, devices and equipment from the plans floor by floor. Counts are cross-checked against the fixture and device schedules.

Conduit and wire are measured by route from panels to devices, with feeders measured from the riser. Boxes, supports, fittings and terminations are added, and gear such as panels and transformers is listed by size and manufacturer so lead times are visible.

Risk

What do electrical bids usually miss?

These are the items we check on every set, because they are where bids lose money.

  1. 01

    Feeder lengths taken from the actual routing, not straight-line distances between panels.

  2. 02

    Fixture types counted from the schedule with controls, drivers and emergency ballast included.

  3. 03

    Equipment connections coordinated from the mechanical and kitchen schedules, not the power plan.

  4. 04

    Labor units applied by system and height, the same device costs more on a 30-foot ceiling.

Deliverable

What does an electrical estimate look like?

Line items are organized by CSI code with quantities you can trace back to the marked-up sheets.

Electrical estimate.xlsxIllustrative sample
Illustrative line items, not from a client project
CSIItemQuantity
26 27 26Devices & boxes186 EA
26 51 00Lighting fixtures124 EA
26 24 16Panelboards & gear6 EA
26 05 33Conduit & fittings3,240 LF
26 05 19Conductor, feeder/branch9,600 LF

Illustrative structure only. Your estimate is measured from your own drawings.

Projects

What kinds of electrical projects do we estimate?

We estimate electrical work from tenant improvements and retail fit-outs to schools, clinics, warehouses and multi-story residential. Larger projects are measured by system and floor so the totals reconcile with the risers, and each estimate shows quantities by fixture, device, conduit and wire type.

Why Nova

Why use Nova Estimation for electrical estimating?

  • Counts reconciled across sheets

    Fixtures, devices and panels are counted from the plans and cross-checked with the schedules and risers.

  • Wire and conduit measured by run

    Feeders, branch circuits and conduit are taken off by route length, with fittings and supports counted.

  • Gear and fixtures itemized

    Switchgear, panels, transformers and fixture types are listed individually so lead-time items stand out.

Who orders it

Who orders an electrical estimate?

  1. 01

    Electrical contractors pricing a lighting, power and distribution package

  2. 02

    General contractors comparing electrical subcontractor bids

  3. 03

    Developers testing an MEP budget before bidding

What to send

What should you send for an electrical estimate?

These documents let us measure the trade completely. Missing items are flagged in the quote, not guessed.

  • Electrical plans, all floors and site
  • Panel schedules and the one-line diagram
  • Lighting fixture schedule and controls details
  • Electrical specification sections
  • Addenda and bid forms
  • Any supplier quotes you already hold
How it works

How do you order an electrical estimate?

You know the fee and the delivery date before we start. No retainers and no hourly billing.

  1. Upload

    Send the electrical plans, panel schedules, one-line diagram, details and the electrical specification.

    About 2 minutes
  2. Quote

    We confirm whether lighting controls, fire alarm and low voltage are in your scope, then send the fee.

    Within the hour
  3. Estimate

    Devices, fixtures, gear, conduit and wire are counted and measured, then priced to your ZIP code.

    24 to 48 hours
  4. Deliver

    You receive the workbook, marked-up plans and a summary by system and material.

    Bid day ready

Bidding electrical this week?

Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.

Pricing

How much does an electrical estimate cost?

An electrical estimate is quoted as a fixed fee that depends on the number of electrical sheets, how many systems are in scope and the size of the distribution gear. Lighting only is quicker than lighting, power, feeders and controls together.

Send the plans and you receive the exact fee free of charge, usually within the hour on working days, with no retainer and no minimum.

FAQ

Electrical estimating questions

Yes. Conduit and wire are measured by size and type from the plans and one-line diagram, with fittings and supports included.

Yes. Send us your labor unit database or a past estimate and we will apply your units, or we will use industry standard units adjusted for height and conditions.

Yes. Occupancy sensors, dimmers and lighting control panels are counted from the lighting plans and control narrative.

They are estimated separately under low voltage, fire alarm and access control unless you want them combined.

Where the specification makes it part of the electrical scope, temporary power and lighting are included as an allowance.

The fee is fixed per project and quoted free within the hour on working days, based on sheet count and systems in scope. No retainer and no minimum.

Most electrical estimates are delivered in 24 to 48 hours from approval, and the quote confirms the date before you commit.

Yes. Each fixture type is counted from the plans and tied to the schedule, then priced from supplier quotes you send or regional pricing.

Yes, as separate lines or separate estimates if you want to compare subcontractors. Both are covered as individual trades.

Related trades

More MEP trades we estimate

Get a fixed quote

Get a fixed quote for your electrical takeoff

Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.

See sample estimates

What do you need?

Choose one service. You can add more later.

Which trades should we price?

Pick any trades, or choose all trades for a full GC estimate.

Structural and sitework

Architectural

MEP and specialty

About the project

Upload the plan set or paste a link. Add a note if anything needs explaining.