Nova Estimation

Drywall Estimating Services

Drywall estimating is the measured count of gypsum board, metal stud framing, finish levels and rated assemblies taken from your floor plans, partition types and reflected ceiling plans. Nova Estimation delivers the takeoff in Excel with marked-up drawings, organized by CSI Division 09, usually within 24 to 48 hours, so you can price labor and material on the bid.

  • CSI Division 09 Finishes
  • 24 to 48 hour delivery
  • Excel + marked-up PDFs
The problem

Why do drywall bids go wrong?

  • Board counts miss the finish levels

    Level 4 and Level 5 finishes cost far more than Level 3 per square foot, and many bids use one rate for the building.

  • Wall types vary by room

    Fire rated, moisture resistant and acoustic partitions change both board and framing, but get priced as plain walls.

  • Metal framing quantities are guessed

    Stud gauge, spacing and height change the framing material, and a single rate hides it.

Scope

What do we measure in a drywall takeoff?

Every drywall item is measured from your sheets and carried in the units your crews and suppliers price in.

  • Gypsum Board · 5/8" Type X
  • Metal Stud Framing
  • Finish · Level 4
  • Rated Assemblies
  • Corner Bead & Trim
SFboard area by type and thickness
LFstud runs, corner bead, trim
EAaccess panels, control joints
How we price it

How is a drywall estimate priced?

Drywall is measured by partition type because each type sets the board layers, stud gauge and spacing, insulation and height. We measure every wall type separately, by length and height from the plans and sections, then convert to board area and stud count.

Finish level is priced by room, not as one level for the whole job, and ceilings are measured from the reflected ceiling plan at their actual heights. Soffits, bulkheads and shaft walls carry their own lines because they take more labor per square foot.

Method

What do our estimators check on a drywall set?

We start with the partition type schedule and mark each wall type on the floor plans. Lengths and heights give board area, and framing is counted by track and studs at the specified spacing and gauge.

Ceilings are measured from the reflected ceiling plans, including soffits and bulkheads. Finish level, fire rating, insulation and acoustic requirements come from the specification and details, and each partition type appears as its own line.

Risk

What do drywall bids usually miss?

These are the items we check on every set, because they are where bids lose money.

  1. 01

    Finish level by room, not one level for the whole job: Level 5 in the lobby costs real money.

  2. 02

    Rated assemblies, head-of-wall detail and fire-stopping counted from the UL detail, not the wall type.

  3. 03

    Soffits, bulkheads, chases and columns, which take more labor per square foot than flat wall.

  4. 04

    Second-side board where the wall type is single-sided at a shaft or a chase.

Deliverable

What does a drywall estimate look like?

Line items are organized by CSI code with quantities you can trace back to the marked-up sheets.

Drywall estimate.xlsxIllustrative sample
Illustrative line items, not from a client project
CSIItemQuantity
09 29 00Gypsum board, 5/8" type x9,240 SF
09 22 16Metal stud framing2,180 LF
09 29 10Finish, level 49,240 SF
09 21 16Rated assemblies1,460 SF
09 22 26Corner bead & trim1,320 LF

Illustrative structure only. Your estimate is measured from your own drawings.

Projects

What kinds of drywall projects do we estimate?

We estimate drywall for apartments, offices, medical buildings, schools and tenant improvements. Partition types, ceilings and finish levels are measured as separate lines with framing and insulation included on request.

Why Nova

Why use Nova Estimation for drywall estimating?

  • Partition type by partition type

    Each wall type is measured by length and height with its board layers, framing and insulation.

  • Finish levels separated

    Level 3, 4 and 5 finishes are measured as their own areas.

  • Ceilings and soffits counted

    Hard lids, soffits and bulkheads are measured apart from walls.

Who orders it

Who orders a drywall estimate?

  1. 01

    Drywall contractors pricing framing, board and finish

  2. 02

    General contractors comparing interior bids

  3. 03

    Developers checking tenant improvement budgets

What to send

What should you send for a drywall estimate?

These documents let us measure the trade completely. Missing items are flagged in the quote, not guessed.

  • Floor plans and partition type schedule
  • Reflected ceiling plans
  • Wall sections and rated assembly details
  • Drywall and finishing specifications
  • Addenda and bid forms
  • Finish level requirements
How it works

How do you order a drywall estimate?

You know the fee and the delivery date before we start. No retainers and no hourly billing.

  1. Upload

    Send the floor plans, partition types, reflected ceiling plans and the drywall specification.

    About 2 minutes
  2. Quote

    We confirm board types, finish levels and whether framing and insulation are included.

    Within the hour
  3. Estimate

    Walls and ceilings are measured by partition type, then converted to sheets, linear feet of track and studs.

    24 to 48 hours
  4. Deliver

    You receive the workbook with marked-up plans and a quantity summary by wall type.

    Bid day ready

Bidding drywall this week?

Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.

Pricing

How much does a drywall estimate cost?

A drywall estimate is a fixed fee that depends on the number of floor plan sheets, how many partition types appear and whether framing, insulation and ceilings are included.

A repeated apartment layout is faster than a hospital with many rated assemblies. The fee arrives free within the hour on working days.

FAQ

Drywall estimating questions

Yes. Studs, track, bracing and deflection head are measured with the board for each partition type.

Finish level is taken from the specification and room finish schedule, so a Level 5 lobby is priced differently from a Level 4 corridor.

Yes. Rated walls are measured from the UL assembly, including extra layers, head of wall details and fire caulking.

Yes. Hard lid ceilings, soffits and bulkheads are measured from the reflected ceiling plan at their actual heights.

By area for each board type, converted to sheets by size, with waste shown separately so you can order material.

The fee is fixed per project and quoted free within the hour on working days. There is no retainer or minimum.

Most drywall estimates are delivered in 24 to 48 hours from approval.

Yes. Ceilings, soffits and bulkheads are measured separately from walls.

Yes. Finish levels are measured by area, so each is priced at its own labor rate.

Related trades

More architectural trades we estimate

Get a fixed quote

Get a fixed quote for your drywall takeoff

Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.

See sample estimates

What do you need?

Choose one service. You can add more later.

Which trades should we price?

Pick any trades, or choose all trades for a full GC estimate.

Structural and sitework

Architectural

MEP and specialty

About the project

Upload the plan set or paste a link. Add a note if anything needs explaining.