Insulation Estimating Services
Insulation estimating measures each insulated assembly in a building, walls, roofs, floors and foundations, and prices the insulation type and R-value specified for it. Nova Estimation takes off batt, spray foam, rigid board and blown insulation from the sections and energy notes and delivers an insulation estimate in 24 to 48 hours.
- CSI Division 07 Thermal and Moisture Protection
- 24 to 48 hour delivery
- Excel + marked-up PDFs
Why do insulation bids go wrong?
-
R-value drives the quantity
Thickness and type change the volume, and bids that ignore the spec's R-values price the wrong product.
-
Assemblies are scattered
Walls, roofs, floors and rim joists all carry insulation, shown in different details and sheets.
-
Air sealing is often unpriced
Sealants, tapes and spray foam at penetrations are rarely measured, yet are required on many energy codes.
What do we measure in an insulation takeoff?
Every insulation item is measured from your sheets and carried in the units your crews and suppliers price in.
- Batt · R-21 Walls
- Blown · R-49 Attic
- Rigid Board · Foundation
- Spray Foam · Rim Joist
- Air Sealing
How is an insulation estimate priced?
Insulation is priced by assembly because the same area can need very different products. We measure exterior walls, interior acoustic walls, roofs, floors over unconditioned space and foundations separately, each with its specified type and R-value.
Air barriers, vapor retarders, fire safing and sealants are measured as their own lines. Spray foam is calculated by board foot from the specified thickness, not just by area.
What do our estimators check on an insulation set?
We identify each assembly from the wall, roof and floor sections and record the insulation type and R-value shown or specified. Areas are measured from the plans and elevations, with framing factor and thickness considered for batts.
Spray foam is converted to board feet by thickness and area. Rim joists, attic access and penetrations are checked, and air sealing materials are listed when the energy notes require them.
What do insulation bids usually miss?
These are the items we check on every set, because they are where bids lose money.
- 01
Air sealing as a separate scope from insulation, with its own inspection and its own labor.
- 02
Rim joists, cantilevers, knee walls and attic hatches, small areas, disproportionate cost.
- 03
Thermal bridging and continuous exterior insulation required by the energy code, not the wall type.
- 04
Sound batt in interior partitions, which appears on the acoustic schedule rather than the thermal one.
What does an insulation estimate look like?
Line items are organized by CSI code with quantities you can trace back to the marked-up sheets.
| CSI | Item | Quantity |
|---|---|---|
| 07 21 16 | Batt, r-21 walls | 3,180 SF |
| 07 21 19 | Blown, r-49 attic | 2,140 SF |
| 07 21 13 | Rigid board, foundation | 860 SF |
| 07 21 29 | Spray foam, rim joist | 240 SF |
| 07 27 00 | Air sealing | 1 LS |
Illustrative structure only. Your estimate is measured from your own drawings.
What kinds of insulation projects do we estimate?
We estimate insulation for homes, apartments and commercial buildings, from batts and board to spray foam. Each assembly is measured with its R-value, and air sealing can be added as separate lines.
Why use Nova Estimation for insulation estimating?
-
By assembly and R-value
Every wall, roof and floor assembly is measured with the specified type and thickness.
-
Spray foam by board foot
Closed and open cell are measured by thickness and area, so the volume is exact.
-
Air sealing included on request
Sealant and tape quantities are listed separately when the spec calls for them.
Who orders an insulation estimate?
- 01
Insulation contractors pricing batt, spray or board scopes
- 02
Home builders meeting energy code
- 03
General contractors comparing envelope subcontract bids
What should you send for an insulation estimate?
These documents let us measure the trade completely. Missing items are flagged in the quote, not guessed.
- Building sections and wall details
- Roof and floor assembly details
- Energy code compliance notes
- Insulation specification sections
- Addenda and bid forms
- Air sealing requirements
How do you order an insulation estimate?
You know the fee and the delivery date before we start. No retainers and no hourly billing.
Upload
Send wall sections, roof details, the energy notes and the insulation specification.
About 2 minutesQuote
We confirm products, R-values and whether air sealing is part of the scope.
Within the hourEstimate
Each assembly is measured by area and thickness, then converted to batts, board feet or boards.
24 to 48 hoursDeliver
You receive the workbook with marked-up sections and a summary by product and R-value.
Bid day ready
Bidding insulation this week?
Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.
How much does an insulation estimate cost?
An insulation estimate is a fixed fee that depends on the number of sheets showing assemblies, the variety of insulation types and whether air sealing is included.
A repeated residential plan is faster than a mixed commercial envelope. The quote is free and arrives within the hour on working days.
Insulation estimating questions
Yes. Open and closed cell spray foam are measured by area and thickness and converted to board feet.
Yes. Sound batts in interior walls and floors are measured from the partition types and wall sections.
Yes, as separate lines, unless the specification places them in another trade.
By attic or cavity area and specified depth or R-value, converted to bags using the manufacturer's coverage data.
Yes. Safing and firestopping at slab edges and penetrations are measured from the details where they are part of the insulation scope.
The fee is fixed and quoted free within the hour on working days, with no retainer and no minimum.
Typically 24 to 48 hours from approval, shown in the quote.
Yes. Spray foam is measured in board feet by thickness and area, and priced to your supplier or regional rates.
Yes, from the documentation or field measurements you send, with access and demolition shown as separate lines.
More architectural trades we estimate
Get a fixed quote for your insulation takeoff
Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.