Free Construction Calculators
These free construction calculators work out quantities for concrete, drywall, roofing, paint, brick and rebar. Enter your measurements and get the amount to order, with a waste allowance you can change. They show quantities only, never prices, and are built by the estimators who take off these trades every day.
Which calculator do you need?
Pick the job you are pricing. Each calculator shows what you enter and what you get before you open it.
-
Concrete Calculator
This concrete calculator turns the length, width and thickness of a slab, pad or footing into cubic yards, cubic feet, cubic meters and the number of premixed bags.
- You enter
- length, width, thickness, number of identical pieces
- You get
- cubic yards to order, cubic feet, cubic meters
-
Drywall Calculator
This drywall calculator works out how many sheets of gypsum board a room or building needs.
- You enter
- total wall length, wall height, doors and windows to deduct, ceiling area to board
- You get
- sheets to buy, area to board, area with waste
-
Roofing Calculator
This roofing calculator estimates roof area, roofing squares and bundles of shingles from the size of the building, the overhang and the pitch.
- You enter
- building length, building width, eave overhang, roof pitch, rise per 12 in run
- You get
- squares to order, bundles of shingles, roof area before waste
-
Paint Calculator
This paint calculator estimates the gallons of paint needed for the walls and ceiling of a room or building.
- You enter
- total wall length, wall height, doors and windows to deduct, ceiling area to paint
- You get
- gallons to buy, gallons before rounding, area to paint
-
Brick Calculator
This brick calculator estimates how many bricks a wall needs from its length, height, openings, brick size and mortar joint thickness.
- You enter
- wall length, wall height, doors and windows to deduct, brick size, length x height
- You get
- bricks to order, bricks before waste, bricks per square foot
-
Rebar Calculator
This rebar calculator estimates the total length, weight and number of 20 ft bars for a rectangular slab or pad with a grid of bars in both directions.
- You enter
- slab length, slab width, bar spacing each way, on center, bar size
- You get
- weight to order, weight in us tons, total bar length
How accurate are these calculators?
Each calculator applies a standard formula to the measurements you enter, and the page shows that formula. They are accurate for simple shapes, such as one slab, one wall or one roof. They cannot read drawings, so complex shapes, openings and special details need a proper takeoff.
Why do the calculators not show prices?
Cost depends on your supplier, delivery, location and the date you buy. We would rather show quantities you can check than a number we cannot stand behind. Take the quantity to your supplier or subcontractor for a quote, or ask us to price the whole project.
Bid due this week?
Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.
Frequently asked questions
Yes. There is no sign up and nothing to download.
No. They give quantities only, because prices depend on your supplier, location and date.
They are good for simple, single-item quantities. For a bid, measure from the drawings or have a takeoff done.
Ask us. Our estimators cover every major trade and can take off the work from your drawings.
No. The calculators return quantities only, with no prices.
They give a planning quantity from the dimensions you enter. Final quantities should come from a full takeoff of your drawings.
Need a full takeoff or estimate?
-
Construction Estimating
Priced estimates across every CSI division
-
Quantity Takeoff
Measured quantities with color-coded markups
-
Pre-Construction
Budgets before there is a full drawing set
-
Bid & Procurement
Bid packages, scope sheets and bid leveling
-
Construction Cost Consulting
Independent cost reviews and change order pricing
-
Dedicated Estimating
A named estimator working only your bids
-
Specialized Services
BIM, scheduling and insurance repair estimating
Ready to price your next bid?
Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.