Concrete Calculator
This concrete calculator turns the length, width and thickness of a slab, pad or footing into cubic yards, cubic feet, cubic meters and the number of premixed bags. Enter your sizes, add a waste allowance, and read the volume to order. It measures quantity only and does not include any price.
Last updated
- Free, no sign-up
- Quantities only, never prices
- Formula shown on the page
How much concrete do you need?
Start with a 20 x 10 ft slab, 4 in thick, then change the numbers to match your job.
- Length
- Width
- Thickness
- Number of identical pieces
- Waste and over-order allowance
- Cubic yards to order
- Cubic feet
- Cubic meters
- 80 lb bags of premix
- 60 lb bags of premix
Your result
- Cubic yards to order
- 0 CY
- Cubic feet
- 0 cu ft
- Cubic meters
- 0 m3
- 80 lb bags of premix
- 0 bags
- 60 lb bags of premix
- 0 bags
Volume is length times width times thickness, converted to cubic yards by dividing cubic feet by 27. Bag counts use about 0.6 cu ft per 80 lb bag and 0.45 cu ft per 60 lb bag. Check the bag you buy, because yields vary by product.
A calculator handles one item. Send your drawings and an estimator measures every item, with a fixed fee in the hour.
Get a fixed quoteHow is the concrete volume calculated?
Convert the thickness from inches to feet by dividing by 12, then multiply length, width and thickness to get cubic feet. Divide by 27 to get cubic yards, which is how ready-mix concrete is sold. Multiply by the number of identical pieces, then add your allowance.
- Cubic feet = length x width x (thickness / 12) x pieces
- Cubic yards = cubic feet / 27
- Order quantity = volume x (1 + allowance)
What allowance should you use?
Some over-order is normal, because subgrades are never perfectly flat, forms bow slightly and some concrete stays in the truck and on the ground. The calculator starts at 5 percent, which you can change. Uneven ground, thickened edges or hard-to-reach pours may call for more.
What does this calculator not include?
- Reinforcement such as rebar, mesh or fibers
- Thickened edges, steps, curbs and footings under a slab, which should be entered as their own pieces
- Formwork, finishing, curing and pumping
- Any price, because cost depends on your supplier, location and delivery
When should an estimator measure instead?
A calculator is right for a slab, a pad or a few footings. A full project has foundations, walls, columns, stairs and slabs at different thicknesses, and each of those needs to be measured from the drawings and checked against the structural notes. That is a takeoff, and it is what our concrete estimators do.
Need more than a quick number?
Bid due this week?
Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.
Frequently asked questions
A cubic yard is 27 cubic feet, so it takes about 45 bags of 80 lb mix at 0.6 cu ft per bag, or about 60 bags of 60 lb mix at 0.45 cu ft.
That depends on the load and the soil, and the structural drawings or local code decide it. Always use the thickness shown on the plans.
Bags suit small jobs. Larger pours are usually cheaper and quicker with ready-mix, and your supplier can tell you their minimum load.
It takes feet and inches and also shows the result in cubic meters.
Multiply length, width and thickness in feet to get cubic feet, then divide by 27. The calculator does this and adds waste.
Five to ten percent is common for slabs. Footings and walls with irregular forms may need more.
Which other calculators can you use?
-
Calculator
Brick Calculator
Free brick calculator: enter wall length, height, openings, brick size and mortar joint to get the number of bricks for a wall,…
-
Calculator
Concrete Calculator
Free concrete calculator for slabs, footings and pads: enter length, width and thickness to get cubic yards, cubic feet, cubic meters and…
-
Calculator
Drywall Calculator
Free drywall calculator: enter wall length, height, openings and ceiling area to get the area to board and the number of 4x8,…
-
Calculator
Paint Calculator
Free paint calculator: enter wall length, height, openings, ceiling area, coats and coverage per gallon to see how many gallons of paint…
-
Calculator
Rebar Calculator
Free rebar calculator for slabs and pads: enter size, spacing, cover and bar size to get total length, weight in pounds and…
-
Calculator
Roofing Calculator
Free roofing calculator: enter building size, overhang and pitch to get roof area, squares and bundles of shingles, with a waste allowance…
Ready to price your next bid?
Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.