Nova Estimation

Brick Calculator

This brick calculator estimates how many bricks a wall needs from its length, height, openings, brick size and mortar joint thickness. It works out the bricks per square foot of wall, adds waste for breakage and cuts, and gives a count to order. It covers a single wythe of face brick. Quantity only, no price.

Last updated

  • Free, no sign-up
  • Quantities only, never prices
  • Formula shown on the page
Calculator

How many bricks do you need?

Start with a wall 20 ft long and 8 ft high, then change the numbers to match your job.

You enter
  • Wall length
  • Wall height
  • Doors and windows to deduct
  • Brick size, length x height
  • Mortar joint
  • Waste allowance
You get
  • Bricks to order
  • Bricks before waste
  • Bricks per square foot
  • Wall area

Your result

Bricks to order
0 bricks
Bricks before waste
0 bricks
Bricks per square foot
0 per sq ft
Wall area
0 sq ft

Bricks per square foot is 144 divided by (brick length + joint) times (brick height + joint). Sizes shown are common actual sizes, which vary by manufacturer, so check your product. Mortar, ties, lintels and cleaning are not included.

Need the whole project measured?

A calculator handles one item. Send your drawings and an estimator measures every item, with a fixed fee in the hour.

Get a fixed quote

How is the number of bricks calculated?

Each brick in a wall takes up its own face plus half of the mortar joint on every side. Add the joint thickness to the brick length and height, multiply them, and divide the 144 square inches in a square foot by that result. Multiply by the wall area, then add waste.

  • Wall area = length x height - openings
  • Bricks per square foot = 144 / ((length + joint) x (height + joint))
  • Order quantity = wall area x bricks per square foot x (1 + allowance)

Why does the brick size matter?

A modular brick with a 3/8 inch joint comes to about 6.9 bricks per square foot using these actual sizes. A larger brick covers more wall per unit, so you need fewer. Always check the actual size and the joint thickness for the product you are buying.

What does this calculator not include?

  • Mortar, sand and cement
  • Wall ties, flashing, weep holes and lintels
  • Corners, arches, soldier courses and other special shapes
  • Double wythe walls, which need the count doubled, and any price

When should an estimator measure instead?

A single wall is straightforward. A building has openings, returns, brick types and veneer on different elevations. Our masonry estimators measure each elevation from the drawings and list the accessories that go with it.

Bid due this week?

Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.

FAQ

Frequently asked questions

About 6.9 for a modular brick with a 3/8 inch joint, using the actual sizes in the calculator. It changes with the brick size and joint.

Five percent is a common starting point. Cut-heavy walls, many corners or fragile product call for more.

No. Mortar use depends on the brick, joint and mason, so it is better taken from your supplier or your own records.

Run it once and double the result, or enter the total wall area for both wythes.

Divide the wall area by the area of one brick plus mortar joint. The calculator does this for the brick size you choose.

Yes. The calculator adds a waste allowance you can change, because cuts and breakage vary by pattern.

Get a fixed quote

Ready to price your next bid?

Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.

See sample estimates

What do you need?

Choose one service. You can add more later.

Which trades should we price?

Pick any trades, or choose all trades for a full GC estimate.

Structural and sitework

Architectural

MEP and specialty

About the project

Upload the plan set or paste a link. Add a note if anything needs explaining.