Nova Estimation

Roofing Calculator

This roofing calculator estimates roof area, roofing squares and bundles of shingles from the size of the building, the overhang and the pitch. A square is 100 square feet of roof. It adds waste for cuts and starter courses. Quantity only, no price, and it suits simple gable and hip roofs.

Last updated

  • Free, no sign-up
  • Quantities only, never prices
  • Formula shown on the page
Calculator

How much roofing do you need?

Start with a 40 x 30 ft house with a 6 in 12 pitch, then change the numbers to match your job.

You enter
  • Building length
  • Building width
  • Eave overhang
  • Roof pitch, rise per 12 in run
  • Waste allowance
  • Bundles per square
You get
  • Squares to order
  • Bundles of shingles
  • Roof area before waste
  • Pitch multiplier

Your result

Squares to order
0 squares
Bundles of shingles
0 bundles
Roof area before waste
0 sq ft
Pitch multiplier
0 x

Plan area includes the overhang on every side and is multiplied by the pitch factor, the square root of 1 plus (rise / 12) squared. For equal pitches a hip roof has the same area as a gable roof. Check bundles per square on the product label, because it is 3 for many shingles and 4 for some.

Need the whole project measured?

A calculator handles one item. Send your drawings and an estimator measures every item, with a fixed fee in the hour.

Get a fixed quote

How is roof area calculated?

A sloped roof is larger than the building footprint underneath it. Add the overhang to each side of the footprint, then multiply by a pitch factor that depends on the slope. A 6 in 12 roof has a factor of about 1.118, so the roof is about 12 percent larger than its plan.

  • Plan area = (length + 2 x overhang) x (width + 2 x overhang)
  • Pitch factor = square root of (1 + (rise / 12) squared)
  • Roof area = plan area x pitch factor
  • Squares = roof area / 100

How many bundles are in a square?

Roofing is sold by the bundle, and a square is the amount of roofing that covers 100 square feet. Many shingles come three bundles to a square, and some heavier products come four. The label on the shingles tells you.

What does this calculator not include?

  • Underlayment, ice and water shield, drip edge, flashing and vents
  • Ridge and hip cap shingles
  • Dormers, valleys, chimneys and skylights, which add waste and labor
  • Tear-off, disposal and any price

When should an estimator measure instead?

A single roof with one pitch is easy to calculate. Roofs with several pitches, many valleys or low-slope membranes are measured from the roof plan and details. Our roofing estimators measure each area, edge and penetration so nothing is missed.

Bid due this week?

Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.

FAQ

Frequently asked questions

A square is 100 square feet of roof surface.

Ten percent is a common figure for a simple gable. Complex roofs with hips, valleys and dormers need more.

Yes. A steeper roof has more surface than a flatter one over the same building, which is why the pitch multiplier is used.

Set the pitch to 0 for a flat area. Membrane roofs also need edge, flashing and insulation quantities that this calculator does not cover.

Multiply the roof area by the pitch factor, then divide by 100 to get squares. The calculator does this.

Yes. A waste allowance is added, since hips, valleys and cuts use more material.

Get a fixed quote

Ready to price your next bid?

Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.

See sample estimates

What do you need?

Choose one service. You can add more later.

Which trades should we price?

Pick any trades, or choose all trades for a full GC estimate.

Structural and sitework

Architectural

MEP and specialty

About the project

Upload the plan set or paste a link. Add a note if anything needs explaining.