Nova Estimation

Drywall Calculator

This drywall calculator works out how many sheets of gypsum board a room or building needs. Enter the total wall length, the ceiling height, the area of doors and windows, any ceiling area and the sheet size. It adds a waste allowance and rounds up to whole sheets. Quantity only, no price.

Last updated

  • Free, no sign-up
  • Quantities only, never prices
  • Formula shown on the page
Calculator

How many sheets of drywall do you need?

Start with a room with 40 ft of wall at 8 ft high, then change the numbers to match your job.

You enter
  • Total wall length
  • Wall height
  • Doors and windows to deduct
  • Ceiling area to board
  • Sheet size
  • Waste allowance
You get
  • Sheets to buy
  • Area to board
  • Area with waste

Your result

Sheets to buy
0 sheets
Area to board
0 sq ft
Area with waste
0 sq ft

Area is wall length times height, less openings, plus ceiling. The sheet count divides the area with waste by the area of one sheet and rounds up. Compound, tape, screws and corner bead are not included.

Need the whole project measured?

A calculator handles one item. Send your drawings and an estimator measures every item, with a fixed fee in the hour.

Get a fixed quote

How is the number of drywall sheets calculated?

Multiply the total wall length by the wall height to get the wall area. Subtract doors and windows, add any ceiling area, then add a waste allowance. Divide by the area of one sheet and round up to the next whole sheet.

  • Board area = (wall length x height) - openings + ceiling
  • Area with waste = board area x (1 + allowance)
  • Sheets = area with waste / sheet area, rounded up

Which sheet size should you choose?

Longer sheets mean fewer joints, and a 12 ft sheet can span a whole wall in many rooms. Larger sheets are heavier and harder to carry, so the choice also depends on access and who is hanging them. Enter the size you plan to buy and compare.

What does this calculator not include?

  • Joint compound, tape, screws and corner bead
  • Different board types, such as moisture resistant or fire rated, which should be counted separately
  • Soffits, bulkheads and curved walls
  • Any price

When should an estimator measure instead?

Rooms are simple. A commercial building has wall types, fire ratings, shaft walls and ceilings at several heights, and each needs its own count. Our drywall estimators measure these from the partition plans and wall type schedules.

Bid due this week?

Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.

FAQ

Frequently asked questions

Ten percent is a common starting point for a simple room. Rooms with many corners, openings or angles may need more.

You can. Many people deduct large openings and ignore small ones. Enter the total area of the openings you want to deduct.

With 8 ft ceilings the walls total 48 ft of length, so 384 sq ft of wall. With 10 percent waste that is 422.4 sq ft, which is 14 sheets of 4 x 8 ft board before deducting openings and without a ceiling.

Yes. Enter the ceiling area in the ceiling box and it is added to the walls.

Divide the total wall and ceiling area by the area of one sheet, then add waste. The calculator does this for the sheet size you choose.

It gives an estimate of fasteners and joint compound based on the area, which you can adjust.

Get a fixed quote

Ready to price your next bid?

Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.

See sample estimates

What do you need?

Choose one service. You can add more later.

Which trades should we price?

Pick any trades, or choose all trades for a full GC estimate.

Structural and sitework

Architectural

MEP and specialty

About the project

Upload the plan set or paste a link. Add a note if anything needs explaining.