Rebar Calculator
This rebar calculator estimates the total length, weight and number of 20 ft bars for a rectangular slab or pad with a grid of bars in both directions. Enter the size, bar spacing, concrete cover, bar size and a lap allowance. Weights use standard bar weights per foot. Quantity only, no price.
Last updated
- Free, no sign-up
- Quantities only, never prices
- Formula shown on the page
How much rebar do you need?
Start with a 20 x 10 ft slab with a bar mat, then change the numbers to match your job.
- Slab length
- Slab width
- Bar spacing each way, on center
- Bar size
- Concrete cover at each edge
- Laps and waste allowance
- Weight to order
- Weight in US tons
- Total bar length
- 20 ft bars
- Bars in the grid
Your result
- Weight to order
- 0 lb
- Weight in US tons
- 0 tons
- Total bar length
- 0 LF
- 20 ft bars
- 0 bars
- Bars in the grid
- 0 bars
Bar count each way is the slab dimension divided by the spacing, rounded down, plus one. Each bar is the slab dimension less cover at both ends. Weights per foot are standard values for #3 to #8 bars: 0.376, 0.668, 1.043, 1.502, 2.044 and 2.670 lb. Always follow the structural drawings for sizes, laps and chairs.
A calculator handles one item. Send your drawings and an estimator measures every item, with a fixed fee in the hour.
Get a fixed quoteHow is rebar length calculated?
For a grid, count the bars in each direction by dividing the width or length by the spacing and adding one. Multiply each count by the length of one bar, which is the slab dimension less the cover at each end. Add the two directions together, then add an allowance for laps and waste.
- Bars running the length = floor(width x 12 / spacing) + 1
- Bars running the width = floor(length x 12 / spacing) + 1
- Total length = sum of bars x bar length x (1 + allowance)
- Weight = total length x weight per foot
What are the bar weights?
Rebar is usually bought by weight, and the 20 ft stock length is common, though other lengths are available.
| Bar size | Diameter | Weight per foot |
|---|---|---|
| #3 | 3/8 in | 0.376 lb |
| #4 | 1/2 in | 0.668 lb |
| #5 | 5/8 in | 1.043 lb |
| #6 | 3/4 in | 1.502 lb |
| #7 | 7/8 in | 2.044 lb |
| #8 | 1 in | 2.670 lb |
What does this calculator not include?
- Bar chairs, ties and spacers
- Dowels, hooks, bends and stirrups
- Footings, walls and columns, which have different bar layouts
- Mesh, and any price
When should an estimator measure instead?
A slab grid is a simple case. Real projects have bent bars, laps that depend on bar size, dowels and schedules for every footing, wall and column. Our estimators take these off the structural drawings and reinforcing schedules, and show the weight by bar size.
Bid due this week?
Send the plans and bid date today. You get a fixed fee and delivery time before any work starts.
Frequently asked questions
By weight, in tons or pounds, and in stock lengths such as 20 ft. The calculator shows both weight and the number of 20 ft bars.
The structural drawings give the bar size and spacing. If you do not have drawings, ask your engineer instead of choosing one.
Ten percent is a common starting figure to cover laps and cuts. Your drawings may call for specific lap lengths, which can change it.
Not directly. A footing has bars in a different layout. Enter its dimensions as a grid only if the drawings show a grid.
Multiply the total length of each bar size by its weight per foot. The calculator uses standard bar weights.
The calculator adds a percentage for laps and waste. Enter it in the Laps and waste allowance field. Your drawings may call for specific lap lengths, which can change the percentage you choose.
Which other calculators can you use?
-
Calculator
Brick Calculator
Free brick calculator: enter wall length, height, openings, brick size and mortar joint to get the number of bricks for a wall,…
-
Calculator
Concrete Calculator
Free concrete calculator for slabs, footings and pads: enter length, width and thickness to get cubic yards, cubic feet, cubic meters and…
-
Calculator
Drywall Calculator
Free drywall calculator: enter wall length, height, openings and ceiling area to get the area to board and the number of 4x8,…
-
Calculator
Paint Calculator
Free paint calculator: enter wall length, height, openings, ceiling area, coats and coverage per gallon to see how many gallons of paint…
-
Calculator
Rebar Calculator
Free rebar calculator for slabs and pads: enter size, spacing, cover and bar size to get total length, weight in pounds and…
-
Calculator
Roofing Calculator
Free roofing calculator: enter building size, overhang and pitch to get roof area, squares and bundles of shingles, with a waste allowance…
Ready to price your next bid?
Tell us what you are bidding in three short steps. We reply with a fixed fee and a delivery date before any work starts.